NOT LOGGED IN!
USERNAME:         
PASSWORD:



-Anzeige-

Deutsch English SAMPLE ARTICLE      SUBSCRIPTION      Job Market      IMPRINT      INSTRUCTIONS FOR AUTHORS      BUYERS GUIDE
Media Information
Media Information Online
Profile Publications
 
Available Volumes
2005  I   2006  I   2007  I   2008  I   2009  I   2010  I   2011  I   2012  I   2013  I   2014  I   2015  I   2016  I   2017  I  

Available Issues in  2017
1  I   3  I   5  I  

----------------------------------

Volume  2017  I   Issue  5

----------------------------------

Ceramic Monographs 01/2016
Ceramic Monographs 02/2016
Ceramic Monographs 03/2016
Ceramic Monographs 04/2016
Ceramic Monographs 01/2017
Ceramic Monographs 03/2017
Ceramic Monographs 05/2017

----------------------------------

Quicksearch:


 

 

 

 

 

 

 

Interceram is SCOPUS-listed!
SCImago Journal & Country Rank

  Jonnalagadda, K.P. ; Peng, R.L. ; Mahade, S. ; Markocsan, N. ; Nylén, P. ; Björklung, St. ; Curry, N. ; Xin-Hai Li, D.
Hot corrosion behavior of multi-layer suspension plasma sprayed Gd2Zr2O7/YSZ thermal barrier coatings
Interceram 66 (2017) [5] 180-184
High-Performance Ceramics


Abstract:
This study investigates the corrosion resistance of double layer Gd2Zr2O7 /YSZ, triple layer dense Gd2Zr2O7 / Gd2Zr2O7/YSZ and a reference single layer YSZ coating with a similar overall top coat thickness of 300-320 ?m. All the coatings were manufactured by suspension plasma spraying (SPS), resulting in a columnar structure. Corrosion tests were conducted at 900°C for 8 hours using vanadium pentoxide and sodium sulphate as corrosive salts at a concentration of 4 mg/cm2. SEM investigations after the corrosion tests show that Gd2Zr2O7 coatings exhibited lower corrosion resistance than the reference material, YSZ. Reaction between the corrosive salts and Gd2Zr2O7 results in the formation of gadolinium vanadate ( GdVO4) along the top surface and between the columns. While the stresses due to phase transformation of zirconia can be relieved to some extent by realigning of the columns in the top coat, it is believed that GdVO4 formation between the columns, along with low fracture toughness of Gd2Zr2O7 had resulted in lower corrosion resistance. Furthermore, the presence of a relatively dense layer of Gd2Zr2O7 on the top, as a preventive layer for salt infiltration, did not improve the corrosion resistance.

Click page-thumbnail to open full text (pdf):
(Subscription required!)

Page 180 Page 181 Page 182 Page 183 Page 184